What's the best way to lift a bike? - softail duece versus fatboy
I will aim to install the rear axle nut, my '06 HD Softail Duece and the only important thing I have to do is get behind the wheel of the earth. How do I raise the bike so you can install it?
Monday, January 25, 2010
Softail Duece Versus Fatboy What's The Best Way To Lift A Bike?
10 comments:
I saw several people who have built a wooden stand.
The structure is removed from the Gound and 2 x 4 under. This raises the machine is everything you need to balance
Or go to the store this year and ask local sports MC Jack's Bike
Good luck with the Duece.
I bought a bike lift at Costco for $ 40. It was a lift and came with a mechanical head. It was the quality and unprofessional, but I blame a bicycle around her. To make sure the belt. And remember, if you take the rear wheel of the bike is very difficult before. I built a bicycle and a rigid, what I can do is get behind the wheel too. Good luck, if you've never before.
You go to a Harley store and ask the same question
To talk to Jack?
Create drag the page and put the cat under the rail, located near the swingarm (experience).
The bike is the front wheel to the side stand pivot and Jack.
I have this method for the transportation of motor --
Rest of the front wheel against a wall or desk.
Use Tie Belt handlebars to the bank to keep the bike upright and in position.
Place the jack under the frame.
Is not that the bike has a center can stand? Most bikes do when you can not get an increase from a bicycle, a few hundred dollars, they also bit of a more, I saw her sitting on milk crates, but the wheel is probably too strong for them and not the balance of the existence , not even escape. A leather belt with a chain and a crane will also rise. I have trouble understanding the HD is not a central location!
I do not know a Harley Softail, but if you have a rocker who is the best choice is to take it, how to resist to be behind the center of gravity must be strong enough to hold the weight. You must also not fall on the front of the bike. If you have a lift available at the disposal of the seat and use a belt around the frame can be used an engine hoist is strong enough to lift the rear. Another method is to temporarily replace the mounting bolts with high long screws and remove them. Your choice, which refers to the method of disposal.
jack.sold use of bicycles in almost all auto parts stores and Wal * Mart, Kmart, Big Lots loading.
Number one among the jack on the back of a bike as much as possible, while the distance maintained by a person on a bicycle across the Straits of Taiwan to, notice how we consider your time to frequently change the bike against a wall and The handle came away from the wall and 3 away from the wall. Then put the cat in the same place before Jack is to the rear wheel off the ground, while someone has the bike, then the person leaves the bicycle leaning gently into the wall and then manufactured. If keeping your concerns about your companion there, make sure that the bike did not come out of the wall
There is information on Motorcycle Jacks:
http://www.motorcyclegiftshop.com/motorc ...
Prices typically range from $ 50 to $ 200
If you do too much maintenance yourself, what would be a good investment. You might want to keep a few links to low to the bike safe when on the ground.
Harbor Freight has a bicycle rack that lifts both wheels of one of the stop.
http://www.harborfreight.com/cpi/ctaf/di ...
Post a Comment